NL4040 Survivor
Anodized Aluminum lndustrial Luminaire
ALLGEMEINE INFORMATIONEN
| Montage-Modul | Z track system (standard) Busbar bracket system (optional) Angle bracket system (optional) Earthquake hanger system (optional) |
| Betriebstemperatur | -20 °C / +40°C (standard) -20 °C / +80°C (optional,HOT PLUS) -40 °C / +65°C (optional,COLD PLUS) |
| Lagertemperatur | -40°C / +80°C |
| Glas-Montage Optionen | Tool-free clips system |
| LED-Module | Abnehmbare/auswechselbare optische Einheit |
| Objektiv-Optionen | 30° (High-Bay), 60° (Mid-Bay), 90° (Low-Bay)(Standart), 120° (Extra Low-Bay), 39°x90° (Corridor), Project-specific lens selection (optional) |
| Haupt-Referenz Unternehmen Standards | EN 60598-1, EN 60598-2-1, EN 62471, EN 60068-2-11, EN60068-2-52, ISO9227, ASTMB117, ASTMD3359-78, ISO 4628-2, ISO 4628-4, EN 60529, EN 62262, ANSIC136.10-2017, ANSI C136.2-2018, EN 62031, IEC 62384, ASTM D3359, EN ISO 2409, IES LM 80-15, IES LM 82-12, IES LM 84,14, IES LM 85-14, IES TM 21-11, ISO9001, ISO14001, ISO18001, ISO5001, TS EN/ISO 17025 |
ELEKTRISCHE INFORMATIONEN
| Elektrische Klasse | Klasse I, Klasse II (fakultativ) |
| Nennspannung | 220-240V 50/60 Hz EU 110-277V 50/60 Hz (optional) NORTH AMERICA |
| Led-Strom | 250mA, 350mA, 400 mA, 450mA, 500mA, 600mA, 700mA, 900mA, 1050mA, 1200mA |
| Leistungsfaktor | ≥0,9 (bei Volllast) |
| Treiber | Konstantstrom, thermisch geschützt, Spannungsgeregelt, Oberwellenfilterschutz |
| Überspannungsschutz Optionen (kV) | 6 kV (optional) 10 kV (optional) with LED signal and thermo fuse to disconnect load at the end of life 20 kV (optional) with LED signal and thermo fuse to disconnect load at the end of life |
| Kontrollsystem | on-off (standard), Bluetooth, DALI, 1-10V DIM, Stand alone automation |
| Steckdose | NEMA 4-pin (ZHAGA book 18) (optional) NEMA 5-pin (ANSI C136.41)(optional) NEMA 7-pin (ANSI C136.41)(optional) |
| Sensor | PIR (optional), Photocell (optional), Daylight (optional) |
| Mains connection | Für Kabel mit einem maximalen Querschnitt von 2,5 mm2 Abgangskabel H05RN-F 2/3/5 x 1,5 mm2 Länge auf Anfrage.(optional) |
| Electromagnetic compatibility (EMC) | IEC 61000, EN 55015, IEC 61000-3-2, IEC 61000-4-5, IEC 61547, IEC 61000-3-3, IEC 61000-4-2, IEC 61000-2-2, IEC 61000-4-11, IEC 61643-11 |
GEHÄUSE UND MATERIALIEN
| Gehäuse | Corrosion resistant aluminum extrusion |
| Optisch | PMMA oder PC |
| Dichtung | Silicon or polyurethane without junction points |
| Refraktor | Gehärtetes Glas min. 4mm hohe Lichtdurchlässigkeit UV-beständig (optional) |
| Standard Farbe | RAL830 Anti-microbial (optional) Project-specific colour selection |
| Straffheitsgrad | IP66 |
| Impact Housing Resistance | IK10 (20 J) |
| Impact Glass Resistance | IK09 (standart) (10 J), IK10 (opsiyonel) (20 J) |
| Vibrationstest | IEC 68-2-6 (0.5G), ANSI C136.31 (3G-5G) |
| Cap | Glass-fibre UV stabilized, auto extinguishing recyclable polymer (RAL7035) |
| Connector | 5 pin terminal connector |
OPTISCHE INFORMATIONEN
| Led colour temperature | 2700K (warm white), 3000K (warm white), 4000K (neutral white) (standard), 5000K (cool white), 5700K (cool white), 6500K (cool white) |
| Colour rendering ındex (CRI) | CRI ≥80 CRI ≥90 (optional) |
| Upward light output ratio | 0% |
| Photobiological safety class | IEC 62471, EN 62778 FREIGESTELLTE GRUPPE |
| Prüfnorm | LM 79-19 , EN 13032-1, EN 13032-2, (all measurements in ISO17025 accredited laboratory) |
| Lifetime of the LED's | Tq= 25°C, >102.000h - L70 Tq= 55°C, >102.000h - L70 |
